| 1 | | Flange with gasket | | |
| 3 | | Gasket | | |
| 4 | | Ti electrode with connecting cable | | |
| 5 | | Temperature sensor | | |
| 9 | | Angled panel | | |
| 10 | | R.h. side panel | | |
| 11 | | L.h. side panel | | |
| 12 | | Front panel, bottom | | |
| 13 | | Front panel, top | | |
| 15 | | Lower thermal insulation | | |
| 16 | | Container hose | | |
| 17 | | Drip container | | |
| 18 | | Safety valve | | |
| 19 | | Circulation pump motor UPS 60 | | |
| 20 | | 3/2-way valve with stepper motor | | |
| 22 | | Pressure gauge | | |
| 23 | | Retainer, plug-in connector | | |
| 24 | | Drain valve R 1/2" | | |
| 25 | | Shut-off valve DN 20 | | |
| 28 | | Gasket set | | |
| 29 | | Sealing washer Ø21.0 x 30.0 x 2.0 | | |
| 30 | | Fixing elements | | |
| 31 | | Circulation pump motor VIZ 25/5-3 | | |
| 32 | | Plate-type heat exchanger | | |
| 33 | | Diaphragm safety valve 3 bar | | |
| 34 | | Three-way ball valve G 1" | | |
| 35 | | Fill valve DN 20 | | |
| 36 | | Quick acting air vent valve G 3/8" | | |
| 37 | | Connecting pipe HV | | |
| 38 | | Thermocouple | | |
| 39 | | Temperature sensor | | |
| 40 | | Grommets (set) | | |
| 41 | | Profiled gasket | | |
| 42 | | Safety spring | | |
| 43 | | Heat exchangers | | |
| 44 | | Siphon connection | | |
| 46 | | O-ring Ø28 x 2.5 | | |
| 47 | | Boiler flue connection plug | | |
| 48 | | Pressure gauge and fem. Connection | | |
| 49 | | Boiler flue connection Ø60/100 | | |
| 50 | | Burner door | | |
| 51 | | Ignition unit | | |
| 53 | | Insulation ring | | |
| 54 | | Burner gauze assembly | | |
| 55 | | Burner gauze assembly gasket | | |
| 58 | | Fan outlet gasket | | |
| 59 | | Radial fan | | |
| 60 | | Mixer | | |
| 61 | | Gas train | | |
| 62 | | Plug-in connector retainers (set) | | |
| 64 | | Hook-in lock (set) | | |
| 65 | | Cap panel with gaskets | | |
| 66 | | Gas supply pipe | | |
| 67 | | Connection pipe HR | | |
| 68 | | Ventilation air gasket Ø100 | | |
| 69 | | Lip seal Ø60 | | |
| 70 | | Diaphragm expansion vessel 10 l | | |
| 71 | | Connection line; diaphragm expansion vessel | | |
| 72 | | Back panel lid | | |
| 73 | | Clip nut | | |
| 74 | | Plug-in connector gasket set | | |
| 80 | | Vitodens control unit | | |
| 81 | | Back cover | | |
| 82 | | Support | | |
| 83 | | Flap | | |
| 84 | | Pressure gauge retainer | | |
| 85 | | Clip (10 pce.) | | |
| 86 | | Hinge (10 pce.) | | |
| 87 | | Internal extension H1 | | |
| 88 | | LON module | | |
| 89 | | Adaptor PCB | | |
| 90 | | Boiler coding card | | |
| 91 | | Fuse 6.3 A slow (10 pce.) | | |
| 92 | | Programming unit | | |
| 95 | | Locking clips (10 pcs.) | | |
| 110 | | Outside temperature sensor | | |
| 112 | | Flue gas temperature sensor | | |
| 120 | | Locking handle | | |
| 121 | | Cylinder temperature sensor | | |
| 122 | | Hinge pins (10 pce.) | | |
| 127 | | Impressed current anode PCB | | |
| 129 | | Vitosolic 100 | | |
| 130 | | Overflow valve | | |
| 131 | | Pivoting arm l.h./r.h. | | |
| 144 | | Connection adaptor PCB | | |
| 150 | | T&P valve | | |
| 52 | | Burner gasket | | |
| 56 | | Ignition electrode | | |
| 57 | | Ionisation electrode | | |
| 45 | | Special grease | | |
| 62 | | Burner maintenance set | | |
| 63 | | Set of small burner parts | | |
| 93 | | Cable harness X8/X9 | | |
| 94 | | Cable harness 100/35/34 (auxiliary earth) | | |
| 96 | | Cable harness X3 | | |
| 97 | | Cable 96/40/X7 | | |
| 98 | | Cable X2/Vitosolic | | |
| 99 | | Power cable, stepper motor | | |
| 100 | | Ionisation cable | | |
| 101 | | Internal ionisation cable | | |
| 102 | | Connection cable, impressed current anode | | |
| 103 | | Connecting cable X7/Vitosolic | | |
| 104 | | Adaptor, ionisation current test cable | | |
| 105 | | Cable X6/LED impressed current anode | | |
| 140 | | Touch-up paint stick, Vitowhite | | |
| 141 | | Spray paint, Vitowhite | | |
| 142 | | Installation and service instructions | | |
| 143 | | Operating instructions | | |
