Vitodens 200-W B2HA 125kW

Vitodens 200-W B2HA 125kW

Vitodens 200-W B2HA 125kW-1

Vitodens 200-W B2HA 125kW-2

Vitodens 200-W B2HA 125kW-3

Vitodens 200-W B2HA 125kW-4

Vitodens 200-W B2HA 125kW-5

Vitodens 200-W B2HA 125kW-6

IDPart NumberPart DescriptionNotesPurchase
1Fixing clip (2 pce)
3Contact guard
4Control unit support
5Siphon grommet
6Wall mounting bracket
7Cover panel
8Front panel
1Diaphragm grommet Ø 110
2Lip seal Ø 150
3Lip seal Ø 110
4Boiler flue connection plug
5Flue gas temperature sensor
6Condensate hose
8Boiler flue connection
9Gas supply pipe
10Connection pipe
11Gasket G1 (5 pce)
12Condensate drain set
13Gasket G1¼ and G1½
14Heat exchanger with hydraulics
15Thermal insulation block
1Gasket, ignition electrode (5 pce)
2Gasket, ionisation electrode (5 pce)
3Radial fan
4Gas train
5Burner gasket
6Burner door
7Thermal insulation ring
8Flue gas non-return device
9Ionisation electrode
10Cylinder burner gauze assembly
11Adaptor flange
12Ignition unit
13Ignition electrode block
14Burner gauze assembly gasket
15Door screws (set)
1Clip Ø 8 (5 pce)
2Temperature sensor (2 pce)
3Pressure gauge
4Flow sensor
1Control unit
2Casing back panel
3Coding card
4Fuse 6.3 A slow (10 pce)
5Fuse holder, 6.3 A (slow)
6Programming unit for weather-compensated mode
7Programming unit for constant temperature mode
8LON communication module
9PCB adaptor
10Cable harness X8/X9/ionisation
11Cable harness 100/35/54/earth
13Mating plug
14Cable ties (10 pce)
15Locking bolts, left and right
17Outside temperature sensor RF
18Outside temperature sensor NTC
20Internal H1 extension
1Operating instructions for weather-compensated mode
2Operating instructions for constant temperature mode
3Installation and service instructions
4Spray paint, Vitowhite
5Touch-up paint stick, Vitowhite